Clamex P-14/10 Flexus is a detachable furniture connector with flexible positioning pins and is anchored in the form-locking P-System groove within seconds. Through the minimalist 6mm access hole, Clamex P-14/10 Flexus is firmly connected and disconnected using a lever. The flexible positioning pins allow work pieces to be installed in an already assembled cabinet, simplifying the assembly sequence.
Clamex P-14 is used in mitre joints from 18mm material thickness and in butt joints from 12mm.
- Flexible positioning pins allow freely selectable assembly sequence
- Flexible positioning pins align the workpiece and keep it in position
- Bevelled and movable positioning pins enable the tilting of the workpiece in both directions
Clamex P-14/10 Flexus size:
P-14 Flexus: 64 x 13.5 x 9.7mm
P-10 Medius: 52 x 7.5 x 9.7mm
Required cutter:
ø 100.4 x 7 x 22mm
Material connector:
Glass fibre reinforced plastic
Material lever:
Zinc die-cast
Installation tolerance:
Longitudinal ± 0mm
Tensile strength (N) Particle board: ⁓ 600
Tensile strength (N) MDF: ⁓ 720
Tensile strength (N) Beech: ⁓ 810
Installation instructions: Click here
