M53.1050.01MP - Drill Press P - The specialist tool
As a drilling and fittings insertion specialist, multipress machine P takes on the routine jobs in the workshop producing precise assembly results for cabinets, doors, and fronts. Once setup is complete, drilling, and fitting processes are fast, accurate and easy. There are also optional components available making assembly even easier, e.g. additional drilling heads for tool-free drill changes
Advantages at a glance
-
Vertical drilling and component insertion
-
Drilling distance settings using spindle
-
Pneumatic feed
Supplied with accessories
M53.0720 (I17) Hold down clamp R+L
MZA.5300 (I18) Worktable
MZE.2110 (I16) Position indicator
M01.ZB35.02 (K19) 35 x 57mm Drill bit
M01.ZB08.03 (K9) 8 x 57mm Drill bits
MZL.1250 (H11) Extention ruler 1250mm
M30.1304.02 (l14) Drilling depth stop
MZV.2E00 (H13) Support for extension ruler
Once set up, the Blum drilling machine P is great for handling frequently-used drilling patterns. It can also be used to insert fittings quickly and easily.
Technical attributes
Type of machine | Drill P |
Type of device | Table device |
Assembly device variation | With accessories |
Control and drive | Electro-pneumatic |
Drilling and processing direction | Vertical drilling |
Processing possibility | Drilling and component insertion |
Drilling head assembly | Screw assembly |
Type of connection | 1-phase |
Nominal voltage | 1x230 |
Operating power/frequency | 1 x 230V, 50Hz |
Nominal current | 8.5 |
Motor performance | 1,1 |
Frequency | 50Hz |
Safety certificate | CE declaration of conformity |
Model | 05 |
Length of base ruler | 600mm |
Dimension breakdown | Calibration from zero position: 11 13/16 Inch le, 11 13/16 Inch ri |
Dimension breakdown | Calibration from zero position: 300 mm left, 300 mm right |
Connection pressure | 5bar to 7bar |
Air consumption / cycle | 1.5 litres per cycle |
Type of chip removal | Chip blow-off and chip exhaust |
Maximum wood thickness Wood thickness | 45mm (drilling only) |
X-coordinate (parallel ruler) | 300mm to left(MINUS),0mm(CENTREPOINT),300mm to right(PLUS) |
Y-coordinate (right angle against ruler) | Vertical, from 0 to 70mm backwards |
Z-coordinate (height) | 45mm downwards (MINUS) |
Processing of | front fixings |
Processing of | hinges |
Processing of | mounting plates |
Processing of | connector |
Drilling for: | System drilling |
Net weight of assembly device | 46kg |
Mark of conformity on serial tag | CE |
Dimensions (height/width/depth) | 710mm, 610mm, 760mm |
To find out more information and the entire range: Catalogue and technical manual