Professional edge banding from application through to the finished edge. The Festool KA 65-Set CONTURO Edge Bander is designed for applying wood, plastic and melamine edging to straight panels, curves and shaped furniture. It’s suitable for both workshop and site use, whether you’re creating bespoke furniture, carrying out fitting work or repairing existing edges.
The cartridge gluing system heats the adhesive only when it’s needed, helping to keep application clean and making it quick to change between adhesive colours. A clear view of the workpiece also makes it easier to follow straight, curved and shaped edges as you work.
With edge thicknesses from 0.5-3mm and heights from 18–65mm, the KA 65 can handle a wide range of furniture and panel work. It can also be used in a stationary setup for small batches and angled edging from 0-47°.
This Set includes accessories for trimming, scraping, sanding and polishing, giving you what you need to take the edge from initial application through to a clean, finished result.
What's Included
- CONTURO KA 65 edge bander
- Front handle
- KSP-KA 65 edging magazine
- ZR-KA 65 additional roller
- KP 65/2 trimming machine
- ZK HW 45/45 scraper
- LAS-STF-KA 65 scratch protector
- HSK 80x133-H sanding block
- 20 x Granat P320 abrasive sheets
- Sanding fleece
- Polishing felt
- Polishing agent
- 4 x natural EVA adhesive cartridges
- Systainer³ SYS3 M 337
Technical Specifications
- Power consumption: 1,200W
- Edge height: 18-65mm
- Edge thickness: 0.5-3mm
- Minimum inner radius: >50mm
- Heating time: 8 minutes
- Melting temperature: 100-210°C
- Feed speed: 2 / 4m/min
- Cable length: 6m
- Drive type: Mains
